趕快加入我們來參與討論吧!
您需要 登錄 才可以下載或查看,沒有帳號?加入我們
x
本帖最後由 HSCHE 於 2014-4-29 08:04 編輯
TeX 是一種由 Donald Knuth 所發展出的一套文書排版軟體。這套軟體可以將原始文件檔加上一些像字型等型態後,轉成一份很漂亮的文件。而一份漂亮的文件是需要用 `` 和 " 來把別人說的話給「引」出來,而不是用大部份鍵盤上有的 " 。雖然鍵盤裡通常不會有這種有方向的雙引號鍵,不過上面有左單引號 ` (有人叫 backquote ),和右單引號 ' (有人叫 apostrophe 或 quote )。你可以在你的鍵盤上找一下,不過要小心不要將 ` 與 \ ( backslash 鍵)搞混了。而在 TeX 裡,使用者可以輸入兩個左單引號 `` 來構成一個左雙引號 `` ,或者是兩個右單引號 '' 來構造一個右單引號 '' ,不過呢,通常大家打字時都很習慣用普通的雙引號 " 來引述別人的話。 如果原始文件檔內容是: "To be or not to be," quoth the bard, "that is the question." 則 TeX 作出來的文件並不會是我們所想要的: ``To be or not to be," quoth the bard, ``that is the question." 為了要得到上面的文件,我們需要把原始文件變成這個樣子: ``To be or not to be,'' quoth the bard, ``that is the question.'' 你現在必須要寫一個程式,將普通的雙引號("),轉成有方向性的雙引號,而其它文字則不變。而在把普通的雙引號換掉的時候,要特別注意,當要開始引述一句話時要用 `` ,而結束引述時要用 '' 。不用擔心會有多層巢狀引號的情形,也就是第一個引號一定是用 `` 來代替,再來用 '',然後用 `` ,接著用 '' ,依此類推。 Input and Output 輸入是若干列的文字,其中有偶數個雙引號( " ),以 end-of-file 做結束。輸出的文字必須和輸入的一模一樣,除了: - 每一組雙引號的第一個 " 必須用兩個 ` 字元(就是 `` )來代替
- 每一組雙引號的第二個 " 必須用兩個 ' 字元( 就是 '')來代替。
Sample Input "To be or not to be," quoth the Bard, "thatis the question".The programming contestant replied: "I must disagree.To `C' or not to `C', that is The Question!"Sample Output ``To be or not to be,'' quoth the Bard, ``thatis the question''.The programming contestant replied: ``I must disagree.To `C' or not to `C', that is The Question!''
在此附上題目連結UVA:http://uva.onlinejudge.org/index.php?option=com_onlinejudge&Itemid=8&category=24&page=show_problem&problem=208LUCKY CAT:http://luckycat.kshs.kh.edu.tw/homework/q272.htm解題感想:這題主要是讀入的問題,只要成功讀入之後,輸出便不是問題,切記要換行!!
AC CODE:#include<iostream>
#include<cstdio>
#include<cstring>
using namespace std;
int main()
{
int ans=0;
char a[10000];
while(gets(a))
{
int T=0;
while(a[T])
{
if(a[T]=='\"')
{
ans++;
if(ans%2==1)
{
cout<<"``";
}
if(ans%2==0)
{
cout<<"''";
}
}
else
cout<<a[T];
T++;
}
cout<<"\n";
}
}
|